| 型号 | 品牌 | 功能应用 |
|---|
| DG445DY | MAXIMIC | "Improved, quad, SPST analog switch" |
| MAX1672C/D | MAXIMIC | Step-ur/down DC-DC converter in QSOP package |
| MAX191BCNG | MAXIMIC | "Low-power, 12-bit sampling ADC with internal reference and power-down. Error(LSB) +-1." |
| DG302ABK | MAXIMIC | "Quad, TTL compatible CMOS analog switch." |
| MAX6320PUK34BX-T | MAXIMIC | "Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.400V, reset timeout(min) 20ms, watchdog timeout(typ) 102ms" |
| MAX265BMJI | MAXIMIC | Pin and resistor programmed universal active filter. Accyracy 2% |
| MAX264BCPI | MAXIMIC | Pin programmable univesal and bandpass filter. Accuracy 2%. |
| MX7228CQ | MAXIMIC | CMOS octal 8-bit D/A converter. Error +-1 LSB |
| MAX3875E/D | MAXIMIC | "2.5Gbps, low-power, +3.3V clock recovery and data retiming IC." |
| MAX6315US45D2-T | MAXIMIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 4.50V. Reset timeout period(min) 20ms. |
| MAX309CPE | MAXIMIC | "Precision, dual 4-channel, high-performance, CMOS analog multiplexer." |
| MAX6320PUK31CY-T | MAXIMIC | "Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.080V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec" |
| MAX414CSD | MAXIMIC | "Quad, 28MHz, low-noise, low-voltage, precision op amp." |
| MAX6320PUK37BX-T | MAXIMIC | "Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 20ms, watchdog timeout(typ) 102ms" |
| MAX6314US40D1-T | MAXIMIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 4.00V. Reset timeout period(min) 1ms. |
| MXL1178CN8 | MAXIMIC | "17microA max, dual, single-supply precision operational amplifier." |
| MAX6306UK36D2-T | MAXIMIC | "Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 3.510(min),3.690(max) Nominal timeout period 20ms." |
| MAX7414EUA | MAXIMIC | "5th-order, lowpass, switched-capacitor filter. Filter response butterworth, operating voltage +3V" |
| MAX4551C/D | MAXIMIC | "+-15kV ESD-protected, quad, low-voltage, SPST analog switches (four NC switches)." |
| DG444DJ | MAXIMIC | "Improved, quad, SPST analog switch" |
| MAX6316MUK32CZ-T | MAXIMIC | "Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.200V, min reset timeout 140ms, typ watchdog timeout 25.6sec" |
| MAX3668EHJ | MAXIMIC | "+3.3V, 622Mbps, SDH/SONET laser driver with automatic power control." |
| MAX742EWP | MAXIMIC | Switch-mode regulator with +5V to +-12V or +-15V dual output. |
| MAX4588EPI | MAXIMIC | "Low-voltage, high-isolation, dual 4-channel RF and video multiplexer." |
| MAX6310UK43D2-T | MAXIMIC | "Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 4.193(min),4.408(max). Nominal timeout period 20ms." |
| MAX6317HUK32DW-T | MAXIMIC | "Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.200V, min reset timeout 1120ms, typ watchdog timeout 6.3ms" |
| MAX4600CWE | MAXIMIC | "1.25om, dual SPST, CMOS analog switch. One NC (normally closed) and one NO (normally open) switch." |
| MAX6376XR29-T | MAXIMIC | "Ultra-low-power voltage detector, 2.9V" |
| MAX152EWP | MAXIMIC | "+3V, 8-bit ADC with 1 micro A power-down" |
| MX7578KCWG | MAXIMIC | Calibrated 12-bit A/D converter |
