| 型号 | 品牌 | 功能应用 |
|---|
| MAX4558CEE | MaximIC | +-15kV ESD-protected, low-voltage, CMOS analog multiplexer. |
| MAX7233AFIPL | MaximIC | Triplexed LCD decoder/driver (4 alphanumeric characters/18 segments; parallel input format). |
| MAX917ESA | MaximIC | 1.8V, nanopower 750nA, Beyond-the-Rails comparator. Internal 1.245V+-1.5% reference. CMOS push/pull output with +-8mA drive capability. |
| MAX155AMJI | MaximIC | 8-channel ADC with simultaneous T/Hs and reference. Error +-1/2 LSB. |
| MAX6317HUK39CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.900V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
| MAX6316MUK29DW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.930V, min reset timeout 1.12sec,typ watchdog timeout 6.3ms |
| MAX1248ACPE | MaximIC | +2.7V to 5.25V, low-power, 4-channel, serial 10-bit ADC. INL (LSB) +1/2,-1/2 |
| MAX541ACPA | MaximIC | +5V,serial-input, voltage-output, 16-bit DAC. INL (LSB) +-1 |
| MAX6316MUK31AY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.080V, min reset timeout 1ms, typ watchdog timeout 1.6sec |
| MAX234EWE | MaximIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX6321HPUK34AX-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.400V, reset timeout(min) 1ms, watchdog timeout(typ) 102ms |
| MAX191AENG | MaximIC | Low-power, 12-bit sampling ADC with internal reference and power-down. Error(LSB) +-1/2. |
| MAX924CSE | MaximIC | Quad micropower, low-voltage comparator. Intarnal 1.182V+-1% voltage reference. |
| MAX6347XR37-T | MaximIC | Microprocessor supervisory circuit (reset output active-high, push-pull). Reset threshold (typ) 3.700V. Order increment 10k |
| MAX218EWP | MaximIC | 1.8V to 4.25V - powered, true RS-232 dual transceiver. |
| MAX6317HUK48AX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.800V, min reset timeout 1ms, typ watchdog timeout 102ms |
| MXL1013DS8 | MaximIC | Dual precision op amp. |
| MAX1296BEEG | MaximIC | 420ksps, +5V, 2-channel single-ended/1channel pseudo-differential, 12-bit ADC with +2.5V reference and parallel interface INL(LSB) +1, -1 |
| MAX6314US41D1-T | MaximIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 4.10V. Reset timeout period(min) 1ms. |
| MAX475CPD | MaximIC | Quad, 10MHz single-supply op amp. |
| MAX1110CAP | MaximIC | 2.7 V, low-power, multichannel, serial 8-bit ADC. 8-channel single-ended or 4-channel differential inputs |
| MAX4573EWI | MaximIC | Serially controlled, clickless audio/video switch. 3-wire, SPI/QSPI/MICROWIRE - compatible. |
| MAX329CWE | MaximIC | Ultra-low lealage monolithic CMOS analog multiplexer. |
| MAX477EUK-T | MaximIC | 300MHz high-speed op amp. |
| MAX4403ASD | MaximIC | Quad, low-cost, single-supply +2.5V to 5.5V, Rail-to-Rail op amp. |
| MAX801MMJA | MaximIC | Supervisory circuit with +-1.5% reset accuracy. Reset threshold(typ) 4.425V. Watchdog. |
| MAX6316MUK36DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.600V, min reset timeout 1120ms, typ watchdog timeout 102ms |
| MAX3224EEPP | MaximIC | +-15kV ESD-protected, 1microA, 1Mbps, 3.0V to 5.5V, RS-232 transceiver with autoshutdown plus. |
| DG306C/D | MaximIC | CMOS dual and quad analog switch. |
| MAX149BCPP | MaximIC | +2.7V to +5.25V, low-power, 8-channel, serial 10-bit ADC. INL(LSB) +-1. |
